Ireland and other countries with hardwater are using home water sanitizers as standard home appliances. Because it is such a common appliance in your home, you will find it beneficial to learn how to use it. This saves time and money – check this out.
Many home softening system installations are very similar, with only a few variations. All softeners include a compartment to place salt/sodium and potassium. They also come with a resin tank and a brine or resin tank.
The main valve distributes hardened water throughout your plumbing systems. A bypass valve can be used when you need to perform maintenance work, so you don’t have the need to shut off your water. The brine is where water is placed to be softened. Control panels are also part of softening systems.
To begin using home water sanitizers, you need to fill your brine tank with water. The size of your water softening device will impact the amount of water required. The recommended water level can be found in the manual. You can also search online for the digital version if the manual is lost.
Now decide if sodium will be used or potassium. Sodium is more commonly used and costs less than potassium. Potassium is better for high blood pressure, kidney disease and heart problems. Heart and kidney disease patients should avoid too much sodium and salt.
Make sure you don’t use too many potassium when replacing salt. One bag of potassium should be enough to soften your water. Too much potassium can make the water harden faster and stop it from softening. Use a stick or a knife to dismantle the machine.
Next, open the control panel. Here you can set the date/time. You must also determine the water hardness to ensure that the machine runs more efficiently. You can purchase a test kit in a hardware shop to determine the hardness of your water. Your water may have a high level of iron. To increase its hardness, you can raise it by 5 per 1ppm.
You can also set an automatic recharge time. You can also set your home water sanitizers to charge in the middle of the night while everyone is sleeping and is unlikely to use water. To be properly charged, the unit must be allowed to recharge for a set amount of time without using hot water.